DESCRIPTION:
Penetron Polyurethane is a two-component aliphatic modified polyurethane.
It features high gloss and fast drying with excellent resistance to acids, alkalies, fumes, solvents, salts, seawater and various other chemicals.
This product should be used whenever the ultimate in chemical, abrasion, and solvent resistance is needed.
BASIC USES:
Industrial and Commercial Flooring, Warehouses, Ramps, Garages, Locker Rooms, Firehouses, Pharmaceutical Production Areas, Airplane Hangers, Battery Rooms, Petrochemicals, Offshore Rigs, Sewage Waste Treatment Plants.
Anywhere a highly chemically resistant, graffiti resistant, and decorative coating is desired.
ADVANTAGES:
* Available in clear and colors * High Gloss
* Good low temperature cure as low as 40 degrees F. *Graffiti resistant
* Excellent Solvent Resistance
PHYSICAL PROPERTIES:
Results Test Method
Viscosity
Clear 150 - 200 ASTM D-2392
Pigmented 500 - 700
Pot Life 5 Hours AASHTO-T-237
Tack-Free Time 1 - 2 Hours
Tensile Strength 6500 psi min. ASTM D-638
Tesile Elongation 75 % min. ASTM D-638
Flexibility Excellent ASTM D-522
Taper Abrasion Resistance <.02 grams/1000 cycles 1 KG. Pressure
Mix Ratio by Volume 2 parts A : 1 part B
Coverage 250 - 300 sq. Ft./ gal.
Dry Film Thickness 3 - 5 mils
Solids, % Clear 50 %
Pigmented 65 %
Application Brush, Roller, or Spray Fungus & Bacteria Resistance Will not support growth of fungus or MIL-D-52505
Bacteria when subjected to mildew Test T-T-P34
And bacteria.
PENETRON POLYURETHANE PAGE 2
Surface Preparation:
Remove any oil, grease, dust, dirt or loose paint from the surface to be coated.
All surfaces should be completely dry.
Clean Up:
Use Xylene, PM Acetate, or Lacquer Thinner
Chemical Resistance
Acids: ALKALIES:
Sulfuric Acid Excellent Sodium Hydroxide Excellent
Hydrochloric Acid Excellent Ammononium Hydroxide Excellent
Nitric Acid Excellent Aniline Excellent
Acetic Acid Excellent
Citric Acid Excellent
Oleic Acid Excellent
Lactic Acid Excellent
Phosphoric Acid Excellent
Solvents & Miscellaneous:
Toluene Excellent Xylene Excellent
Mineral Spirits Excellent Benzene Excellent
Gasoline Excellent Turpentine Excellent
Jet Fuel Excellent Isopropyl Alcohol Excellent
Methylene Chloride Poor Trichlorethane Good
MEK Good Acetone Poor
Skydrol Excellent Freon Excellent
Salt Water Excellent Brake Fluid Excellent
WARRANTY
ICS/Penetron International, Ltd. products will perform according to specifications only if directions are followed. ICS/Penetron International Ltd., is not responsible for improper use, application, or storage of its products or for use of its products in unsafe weather or with unsafe engineering or working conditions. ICS/Penetron International, Ltd., products are supplied subject to ICS/Penetron International, Ltd. standard terms and conditions of sale or rental, which limit ICS/Penetron International, Ltd's responsibility for the product. Any warranty of the product is limited to ICS/Penetron International, Ltd. or the manufacturer's standard warranty unless otherwise specifically provided by ICS/Penetron International, Ltd. in writing.
|
